Stainless steel Hot Rolled Coil and Strip
TIASCO stocks and supplies only dual-certified stainless steel hot rolled coil certified to ASTM A240 AND ASME SA240 SA666 SA480.
We offer exceptional versatility, TIASCCO hot-rolled coil and strip are used in virtually all industries and markets. Product Specification and Size.
Hot rolled coils, strips and plates are available in a wide range of heat- and corrosion-resistant grades in all stainless steel.
Types: austenitic, ferritic, duplex and martensitic. The resulting material is highly workable and 100% recyclable.
Dedicated to consistent quality, our hot-rolled plate products with low residual stresses. An advanced levelling process provides superior flatness for various applications
Product Specification and Steel Grade
Available Size
| Weight | Thickness | Inner Diameter | Available Steel Grade |
| 610~2000 mm | 2.5~10.0 mm | 610 +0/-5 mm | 201, 202, 304, 304L, 316L |
Unit Weight Limitation
| Unit : ton | 3 feet | 1M | 4 feet | 5 feet |
| 300 series | 3~17 | 3~18 | 3~22 | 3~23 (≦5.0) / 27 (>5.0) |
| 300 series | – | – | 3~22 | – |
| Remark | Both Cut Edge and Mill Edge are available | |||
Dimension and Shape Tolerance
| Thickness | 3 feet | 1M / 4 feet | 5 feet |
| 2.00~2.49 | ±0.05 mm | ±0.06 mm | – |
| 2.50~3.14 | ±0.06 mm | ±0.07 mm | ±0.09 mm |
| 2.50~3.14 | ±0.07 mm | ±0.08 mm | ±0.10 mm |
| 2.50~3.14 | ±0.08 mm | ±0.09 mm | ±0.11 mm |
* Aim Tolerance = 1/2 (lower limit + upper limit)
Width Tolerance: Mill Edge: Aim ±10 Cut Edge : Aim -0 / +1
Camber : Max. 5 mm / 2M
Telescope & Protruding Wraps: Mill Edge: 50 mm
Cut Edge: 30 mm
Edge Crack: Mill Edge: Max. 5 mm per side
Cut Edge: Not Allowed
