TIASCO services a wide range of industries with quality aluminized steel JIS SA1C, SA1D, SA1E –products:
Aluminized steel is hot-dip coated on both sides with aluminium-silicon alloy. This process assures a tight metallurgical bond between the steel sheet and its aluminium coating, producing a material with a unique combination of properties possessed neither by steel nor by aluminium alone.
Product Feature
CORROSION RESISTANCE
Aluminized Steel has superior performance compared to zinc-coated materials for resistance to atmospheric and salt spray corrosion.
FORMABILITY
Aluminized Steel produces parts containing simple bends to parts with deep drawing requirements. Very fine grains due to the suppression of the growth of aluminium crystal during solidification of the aluminium melt.
HEAT REFLECTIVITY
Aluminized Steel Type 1 has excellent heat reflectivity during exposures to temperatures below 800 °F (427 °C), reflecting up to 80% of the radiant heat that impinges upon it.
HIGH-TEMPERATURE PROPERTIES
Aluminized Steel is an excellent heat resistant material effective up to 1250 °F (677 °C). For applications above 800 °F (427 °C) where alloying of the coating is a concern.
Our aluminized steel material selection offers an extensive assortment of shapes, finishes and alloys, which can be cut-to-size for just the amount you need.
Application:
- Furnaces
- Commercial rooftop
- Automotive mufflers
- Gas Burner
- Water heaters
- Fireplaces
- Barbecue burners
- Oven and Baking pans
- Radiators
We offer two types:
- Type 1
- Hot-dip coated with a thin layer of aluminium/silicon alloy containing 5% to 11% silicon to promote better adherence. The steel can withstand 550 °C (1,022 °F) with almost no change in the base material. However, due to silicon content, it develops black spot. Type 1 is also commonly found in industrial products.
- Type 2
- Hot-dip coated with commercially pure aluminium. It is principally for applications requiring atmospheric corrosion resistance. Type 2 may ultimately be manufactured into corrugated roofing and siding, grain bins, drying ovens, and air-conditioner condenser housings.
Standard:
- A463-CQ / SA1C
- A463-DQ / SA1D
- A463-DDQ / SA1E
Specification: G1~G3, G250~G450
Base Steel Thickness: 0.43 – 3.56 mm
Width: 20mm~1525mm Length: Up to 12,000mm
Coating Mass: T1 13~60
We maintain stock & supply SA1C, SA1D, SA1E aluminised steel. Offer A wide range of in all sizes including 1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm.
Feel free to contact our team anytime.
